This apparatus is suitable for determining the close cup flash point of petroleum and mixture according to IP 33 and IP 170 and also IS 1448 (Part 1)1985 (P : 20). It is supplied with oil cup cover, fitted stirrer, thermometer socket, S.S. water bath and stand. An electric heater is fitted at the bottom for operation on 220 volts AC circuits. With oil test jet, electrically heated with energy regulator control.
OPTIONAL ACCESSORIES
a) Spare nichrome heating element.
b) Thermometer IP 74C having wide range.
c) Thermometer IP 75C having wide range.

As per IP-212 and ASTMD-490 specification and is used for determining the viscosity of lubricating and fuel oils.
It consists of S.S. water bath having a oil cup with lid and a stirring device mounted on stand. The oil cup lid has a thermometer socket in which thermometer rests to check the temperature in the water bath. The bath is fitted with a 500 watts heater and is supplied with a wooden or ebonite valve to fit the jet (without glasswares). Suitable to operate on 220 volts AC mains. Electrically heated with energy regulator control.


ebonite valve to fit the jet (without glasswares). Suitable to operate on 220 volts AC mains. Electrically heated with energy regulator control.

The apparatus is madeas per IP 34, ASTMD-93-58 T and IS 1448 (Part I) 1270 (P: 21) and IS 1203 - 1953 method B. The apparatus consists of brass test cup with handle removable cup cover, with spring operated rotating shutter having piolet jet and stirrer with flexible shaft. The assembly rests in a air bath which is covered with dome shape metal top, the cup is fitted with insulated handle and locking arrangement near cup flange and the assembly is kept on round shape electric heater with temperature regulator. Suitable for operation on 220 volts 50 cycles AC circuits. With oil test jet, electrically heated with energy regulator control.
OPTIONAL ACCESSORIES
Low range thermometer with brass collar I P-15C

24 socket.
g) DO 500 ml.
h) DO 300ml.
i) Tension spring to hold condenser.
j) Clip to hold vapour path tube and boiling flask.
k) Ball joint clip, brass chrome plated.
l) Water bath made of stainless steel double walled thermostatically controlled with adjustable jack for rotary vacuum evaporator.
m) Spare heater for water bath (ISI marked)
n) VACUUM PUMP suitable for rotary evaporator fitted with non-return valve and vacuum gauge with regulator.