Four tubes (4 x 15) ml. with swing out head which lumetric determination and separation of fluid. The centrifuge is fitted with a built multistage speed regulator Complete with 4 buckets of 15ml capacity and 4 glass centrifuge tubes. Workable on 220 volts A. C. and D. C. supplies.

recommended for the sediment to be deposited horizontal. Volumetric determination and separation of fluid. The cetrifuge is fitted with a built multistage speed regulator Complete with 4 buckets of 15ml capacity and 4 glass centrifuge tubes. Workable on 220 volts A. C. and D. C. supplies.

C. supplies.

A single speed machine consisting of a sUbstantial cast base enclosing a pinion and worm drive One thumb screw clamps the machine to the bench. The head with captive trunnion rings, accommodates two 1 5 ml. buckets. In synthetic hammer finish, with removable crank handle. Complete with 2 buckets & 2 glass centrifuge tube.

Same as above, accommodates four 1 ml" buckets complete with 4 buckets and 4 glass centrifuge tubes.

Electrically operated, useful for elting points upto 300°C. Consists of an aluminium block with built in electric heating element. The aluminium block accepts 3 capillary melting point tubes and a mercury thermometer. The lamp mounted block is illuminated from below by a lamp which provides Uniform and shadowless illumination of the complex tube which are viewed through the adjustable lens. The temperature is regulated by a rotary switch. ON/OFF switch but without capillary tubes and without thermometer. The outer body is of cast aluminium.

determination of single or mixed melting points upto 300°C. Consists of an aluminium block with built in electric heating element. The aluminium block accepts 3 capillary melting point tubes and a mercury thermometer. The lamp mounted block is illuminated from below by a lamp which provides Uniform and shadowless illumination of the complex tube which are viewed through the adjustable lens. The temperature is regulated by a rotary switch. ON/OFF switch but without capillary tubes and without thermometer. The outer body is of cast aluminium.

Designed for all shaking operations of the laboratory Kahn's racks bottles or flasks of different sizes can be shaken by adjusting wooden compartment provided in the tray. The size to the tray is 50 x 32 cms. The rate of motion can be adjusted by the mechanical arrangement provided in the pulley, Oscillation 275 to 280 per minute. Complete with 1/4 H.P. motor single phase and 2 meter cable of three core and workable on 220 V A. C. 50 Hz.