| BIOLOGICAL SAFETY CABINET |
|
| The cabinets are fabricated out of thick board duly sunmica clad. The work table is made of heavy gauge stainless steel sheet and is fitted with U.V. Germicidal Light and statics pressure manometer. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-filter and HEPA Filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency retaining all air-borne particles of size 0.3 micron and large, Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced Motor of 1 / 5 H.P. capcity operates with minimum noise level. The working area is illuminated by flourescent lighting fitted to the unit. In addition to the above features of a standard Vartical Laminar Flow Bench the "MB" Bio-safe cabinets have arrangements for re- circulating a part of the air thus creating highest level of clean air. The unit is also convertible to the conventional vertical laminar flow bench with downward air flow by lifting the sliding front door upwards. Air is sucked through the pre-filter and the excess air is thrown out from the top through a HEPA filter. Supplied with glove ports and gauntlets, HEPA Filter Pre-filter, U.V. Light and fluorescent light Model Working Size | 2' x 2' x 2' | 3' x 2' x 2' | 4' x 2' x 2' | | Size of HEPA filter | 2' x 2' x 6' | | 4' x 2' x 6' | | No. of HEPA filter | 1 | | 1 | | Illumination | 1 x 20 W | | 1 x 30 W | | | | | | | OPTIONAL ACCESSORIES | | | | | | (a) | Static Finish S.S. Table Top | | | | | | (i) | Made out of thick 22 SWG | | | | | | (ii) | Made out of thick 18 SWG | | | | | | (b) | Static Pressure Manometer | | | | | | (c) | Exhaust System for 6' Duct | | | | | | (d) | Exhaust ducting (per running feet) | | | | | | (e) | Virus burn out Unit | | | | | | (f) | Gas Burner | | | |
|
|
|
| BLOOD BANK REFRIGERATOR (Temp. Range 4º C± 2ºC) |
|
|
Mounted on a sturdy angle frame the inner chamber is made up of stainless steel and outer of mild steel duly enamel painted. The temperature is maintained within 4ºC to 6ºC for storing blood bottles or blood bags. Temperature is controlled by DIGITAL INDICATOR-CUM-CONTROLLER and triggers the AUDIO VISUAL ALARM in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with DOOR OPERATED ALARM and POWER SUPPLY FAILURE ALARM, as a safety device. Drawers are provided for holding bags/bottles.
.
(a)
| Capacity 85 Liters (50 Blood Bags)
| (b)
| Capacity 165 Liters (108 Blood Bags)
| (c)
| Capacity 200 Liters (120 Blood Bags)
| (d)
| Capacity 280 Liters (200 Blood Bags)
| (e)
| Capacity 400 Liters (300 Blood Bags)
|
OPTIONAL ACCESSORIES
(a) Chart Type Temperature Recorded
(b) Automatic Voltage Stabilizer 3.0 KVA |
|
|
| CARBON DIOXIDE INCUBATOR WITH GERMAN THERMOSTAT SIZE |
|
|
| Inner Chamber size : 470 mm (W) x 530 (D) x 605 mm (H). Fitted with two inlet nozzles for monitoring the mixtures of Co2 gas/air. Supplied fitted with two inlet nozzles but without CO2 gas cylinder, CO2 regulator and air compressor. To work on 220/230 Volts A.C. 470 mm X 530 mm X 605 mm OPTIONALACCESSORIES | (a) | CO2 Cylinder with regulator (Cap. 10 Ltrs.) | | (b) | Air Compressor for above | | (c) | Automatic Voltage Stabilizer 3 KVA |
|
|
|
| DEEP FREEZER |
|
|
Double walled with inner chamber made of stainless steel and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to (-)20ºC or (-) 40ºC or (-) 70ºC is achieved by hermetically sealed compressor. Body is mounted on a sturdy angle iron frame and is mounted on castor wheels. Unit is fitted with Microprocessor based Digital Temperature Indicator-cum- Controller.
With S.Steel Chamber and Digital Temperature Indicator cum controller to control temperature from ambient to -20ºC fitted with 2 air circulation fans.
CAPACITY CHEST TYPE VERTICAL TYPE
(a)
| 4 Cu. Ft
| (b)
| 6 Cu. Ft
| (c)
| 10 Cu. Ft
| (d)
| 12 Cu. Ft
| (e)
| 15 Cu. Ft
|
OPTIONAL ACCESSORIES
(a) Automatic Voltage Stabilizer 4 KVA |
|
|
| Fume Hood |
|
Fabricated out of thick wooden board there are designed so as to throw-out all toxic/harmful vapours, thus protecting costly instruments and the person working in the lab. Outer is finished with sunmica and inner epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit is fitted with flourescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp. socket with switches for exhaust system and flourescent light. To work on 220/230 volts A.C. Supply.
Size 4x2x2/ 1800 usd,3x2x2 / 1700 usd,5x2x2 / 1900 usd ,2x2x2 1500 usd,
8x2x2 / on enquiry, sizes in feet’s
OPTIONAL ACCESSORIES: rates depending upon sizes or models above
(a) Exhaust System (Complete) (b) PVC Fume Duct (Per Ft.) c) Storage Compartments
(d) Lead lining on working walls |
|
|
| Prev 1 2 3 4 5 Next |
| |
| Fume Hood, DEEP FREEZER, CARBON DIOXIDE INCUBATOR WITH GERMAN THERMOSTAT SIZE, BLOOD BANK REFRIGERATOR (Temp. Range 4º C± 2ºC), BIOLOGICAL SAFETY CABINET, |
| Pictures & Specifications are subject to change all rights reserved with Rac Exports |
Zoology Models